Panasonic WJ-HD616K Quick Reference Manual page 15

Operation of VMD
Select camera channels
Move the cursor onto the [Ch] button, and then press
the [SET] button (click with the mouse).
- The camera channel setup menu will be displayed.
To select a camera channel, rotate the jog dial
(inside), click the
on a camera number
Specify the time range
Move the cursor onto the [Time & date] button, and
then press the [SET] button, (click with the mouse).
- The time & Date setup menu will be displayed.
Filter by detection area or detection sensitivity
Move the cursor onto the [Sensitivity] button, and then
press the [SET] button.
→ The sensitivity setup menu will be displayed.
1. Move the cursor onto the [Area]
button of any of the detection area (A
- D), and then press the [SET]
button. (Using the USB mouse click
[Area].
2. Set the start point of the detection
area. Move the cursor to a point to be
set as the start point of the detection
area using the arrows buttons ,
and then press the [SET] button.
Ver.1.0
Search
button using the mouse and click
Front keyboard
Move the cursor onto the entry field, and then press
the [SET] button. The software keyboard (for time and
date entry) will be displayed.
Mouse
Click on the Calendar
and select the date and times by clicking the (
each of the parameters.
Up to 4 detection areas (A - D) can be set. It is also
possible to set the whole displayed area as the
detection area by pressing [SET] button after moving
the cursor onto the [All Area] button. (using the USB
mouse click on the [All Area] button).
Set detection areas and detection sensitivities for
each of them as follows:
WJ-HD616/716 Quick Guide Local Operation
button to call up the calendar
3. Set the end point of the detection area.
Move the cursor to a point to be set as the
end point of the detection area using the
arrow buttons (CDAB) and then press the
[SET] button. Up to 4 detection areas can be
set by repeating steps 1 - 3.
) by
15