Mount And Wire Thermostat - Honeywell Prestige THX9000 System Installation Manual

Mount and wire thermostat

1
Install as shown below. Connect wires to the R and C terminals on the
thermostat.
The other ends of these wires should be connected to the Equipment
Interface Module R and C terminals or to a separate 24 volt transformer
(not provided).
Drywall: 3/16" hole
Plaster: 7/32" hole
Mount and wire Equipment Interface Module
2
Mount Equipment Interface Module
on wall near HVAC equipment, or
on the equipment itself.
Do not install inside HVAC equip-
ment. Use screws & anchors as
appropriate for mounting surface.
Wall anchor
Mounting screw
3
MCR32050 MCR29241
M32051
69-2445EFS—01