Connecting The Speaker Cables; Connecting The Subwoofer - Denon AVR-X7200W Owner's Manual

Contents Connections
o Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
2
Turn the speaker terminal counterclockwise to loosen it.
3
Insert the speaker cable's core wire to the hilt into the
speaker terminal.
4
Turn the speaker terminal clockwise to tighten it.
Front panel Display
Playback Settings
o Connecting the subwoofer
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
To use two subwoofers, set "Subwoofer" to "2 spkrs" in the "Speaker
Config." setting. (v p. 260)
The level and distance can be set separately for Subwoofer 1 and
Subwoofer 2.
SW1
Rear panel 44
Tips
1 CBL/SAT 4 GAME FRONT SURROUND BACK FRONT CENTER
2 DVD 5 CD SURROUND CENTER SUBWOOFER SURROUND SUBWOOFER
1
7.1CH IN
2
3 Blu-ray 6 MEDIA PLAYER ZONE2 ZONE3 SURROUND BACK
AUDIO PRE OUT
(ASSIGNABLE)
STRAIGHT CABLE 1 TV
DC12V 150mA MAX. 1 CBL/SAT 2 DVD 2 CD
AUDIO
1 2
PHONO COAXIAL OPTICAL
AUDIO TRIGGER OUT REMOTE CONTROL RS-232C DIGITAL AUDIO (ASSIGNABLE)
FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK
Remote Index
Appendix
FRONT WIDE
HEIGHT1
HEIGHT2
SURROUND BACK FRONT WIDE/HEIGHT2 FRONT WIDE/HEIGHT2 HEIGHT1 HEIGHT1
ASSIGNABLE ASSIGNABLE ASSIGNABLE
SPEAKERS IMPEDANCE : 4 16 CLASS 2 WIRING
SW2