Airstream INTERNATIONAL TRAILER Owner's Manual page 109

AIRSTREAM INTERNATIONAL TRAILER OWNERS MANUAL
SATELLITE ANTENNA WIRING
If you compare the two previous drawings you'll see wiring for a satellite dish antenna is relatively simple.
Units have a faceplate with two coax cable hook-ups. It is located above the refrigerator cabinet on the AS
model and above the desk on the 22 FT. CCD model. The faceplate has a small coax cable jumper running
between the hook-ups to complete the cable TV circuit when in use. To install a satellite system use the
following procedure:
1. Remove the jumper wire from the coax faceplate.
2. Hook a portable dish into the Cable TV receptacle in the roadside rear underbelly compartment.
This feeds the dish signal to the input side of the faceplate.
3. Install the satellite receiver input and output into the dual coax faceplate.
To return to a cable TV system, remove the satellite receiver from the faceplate and reinstall the jumper
cable.
G-21