Operating Instructions; Power Cord - Kenmore 592.30414 Use & Care Manual

ASSEMBLY INSTRUCTIONS
TOOL PLACEMENT
Place Pet Handimate (A) into the
tool holder on side of the body. Place
dust brush/upholstery tool (B) into its
accessory holder on side of the body.
Place crevice tool (C) into its accessory
holder on side of the body.

OPERATING INSTRUCTIONS

1. Turn the quick release upper cord
wrap to either side and down to
release the power cord.
WARNING
To reduce the risk of electric shock,
this appliance has a polarized
plug (one blade is wider than
the other). This plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician
to install the proper outlet. Do not
change the plug in any way.
A
C
B

POWER CORD

2. Unclip the power cord plug from the
power cord. Place the power cord into
the cord clip on the body as shown.
This helps keep the power cord
out from under the vacuum cleaner
nozzle.
3. Plug the polarized power cord into a
120 Volt outlet located near the floor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
Personal Injury and Product
Damage Hazard
• DO NOT plug in if switch is in the
ON position. Personal injury or
damage could result.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
occur.
8
WARNING