Entering Characters Using Multi-Tap Mode - Motorola MOTORAZR VM9 User Manual

Adding a Word to the iTap English Database
If a word you want to enter is not displayed as an option
when you are using iTap English Text Input, you can add it to
the database.
To add a word to the iTap English Text Input database:
1.
Select the Multi-Tap character input mode. (See
"Selecting a Character Input Mode" on page 42.)
2.
Enter the word using multi-tap text entry. (See
"Entering Characters Using Multi-Tap Mode" on
page 44.) The word appears as an option the next time
you scroll through options during iTap English Text
Input.
To turn the dictionary on or off, press S > Settings > Others
Tip:
> Text Input > Personal Dictionary > On or Off .
To erase your personal dictionary and return to the factory
settings, press S > Settings > Security > Reset Settings >
Personal Dictionary .

Entering Characters Using Multi-Tap Mode

To enter characters by tapping the keypad:
1.
Select the Multi-Tap mode. (See "Selecting a Character
Input Mode" on page 42.)
2.
Press the corresponding keys repeatedly until the
desired letter appears. (For example, to enter the word
"Bill," press
and
B to erase a single character. Press and hold B to erase
an entire word.
By default, the first letter of an entry is capitalized and the
following letters are lowercased. After a character is entered,
44 Section 2A: Phone Basics
2
twice,
5
three times again). If you make a mistake, press
4
three times,
5
three times,