Setting Up Your Phone - Motorola MOTORAZR VM9 User Manual

Setting Up Your Phone

1.
Install the battery (if necessary):
Remove the battery door:
Slide the door toward the top of the phone to
unlock it.
Lift the door off.
Insert the bottom of the battery into the battery
area:
Be sure the gold-colored areas on the battery are
touching the battery contacts on the phone.
Press the battery down to secure it.
Replace the battery door.
Slide the battery down to lock it into place.
O
2.
Press
Your phone will turn on, search for Sprint service,
and enter standby mode.
If your phone is not yet activated, or if it is locked,
see "Getting Started With Sprint Service" on the
following page for more information.
3.
Make your first call.
Use your keypad to enter a phone number.
Press
Note: Your phone's battery should have enough charge to turn on,
find a signal, set up your voicemail, and make a call. You
should fully charge your battery as soon as possible. See
"Charging the Battery" on page 28 for details.
to turn the phone on.
N
.
Section 1A: Setting Up Service 3