Table of Contents
Advertisement
Adding a Word to the Word English Database
If a word you want to enter is not displayed as an option
when you are using Word English Text Input, you can add it to
the database.
To add a word to the Word English Text Input database:
1.
Select the Multi-Tap character input mode. (See
"Selecting a Character Input Mode" on page 31.)
2.
Enter the word using multi-tap text entry. (See
"Entering Characters Using Multi-Tap Mode" on
page 33.) The word appears as an option the next time
you scroll through options during Word English Text
Input.
To turn the dictionary on or off, press O > Settings/Tools >
Tip:
Settings > Others > Text Input > Personal Dictionary > On or Off.
Entering Characters Using Multi-Tap Mode
To enter characters by tapping the keypad:
1.
Select the Multi-Tap mode. (See "Selecting a Character
Input Mode" on page 31.)
2.
Press the corresponding keys repeatedly until the
desired letter appears. (For example, to enter the word
"Bill," press
5
and
three times again). If you make a mistake, press
c
to erase a single character. Press and hold
an entire word.
By default, the first letter of an entry is capitalized and the
following letters are lowercased. After a character is entered,
the cursor automatically advances to the next space after two
seconds or when you enter a character on a different key.
2
4
twice,
three times,
Section 1B: Your Phone: The Basics
5
three times,
c
to erase
33
Advertisement
Table of Contents
