Adjusting the Phone's Volume Settings
You can adjust your phone's volume settings to suit your
needs and your environment.
To adjust your phone's volume settings:
S
1.
Press
2.
Select Ringer, Messaging, Alarm, or Key Beep, and then
follow the prompts to choose volume settings.
— or —
Select Advanced > Applications, Calendar, Connected Call,
Power On or Speaker Phone, and then follow the prompts
to choose volume settings.
3.
Follow the prompts to choose a volume level and press
Done (left softkey).
Tip:
In standby mode, you can adjust the ringer volume by using
the volume keys on the side of your phone.
To reset your volume setting to factory defaults,
press S > Settings > Sounds > Volume > Reset Volumes .
Alert Notification
Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call, when
a call has been lost, when you connect to the network, or
when you received a new messages.
To enable or disable alert sounds:
S
1.
Press
2.
Highlight Service, Minute Beep, Call Lost, Connect, or New
Message and press
3.
Select On or Off and press
Section 2B: Controlling Your Phone's Settings
> Settings > Sounds > Volume.
> Settings > Sounds > Alerts.
S
.
S
.
49