Sage SAGECRDM Instruction Manual page 7

A. Enter the Setting Interface
① Press
to enter the setting interface and follow to the interface
prompts.
Setting interface includes temperature settings, water settings, time
and date settings, energy saving mode, child lock settings, filters and
UV change settings, language settings, ring settings and restore
factory settings.
② Press
to toggle and press
Press to go back to last interface, press
parameters.
B. Temperature Settings
Select the temperature setting item, enter into temperature control interface,
then follow the prompts to set parameters, as follows:
to enter the selected interface.
and select specific
C. Water Quantity Settings
Select water quantity setting, enter into the water regulation interface, and
follow the prompts to set parameters, as follows:
7