Technical Parameter; Installation - Sage SAGECRDM Instruction Manual

2. Technical parameter

(1). Machine parameter
(2).Theoretical sketch:

3.Installation

(1). Overview
Please install the machine in a place of cool, ventilation and soundness, but away from hot
objects. Keep the unit 10cm(4") away from the wall and leave enough space for both sides
of the unit. In order to insure the water quality, please use our company original settings.
(2).Water Supply Connection:
Please keep the machine in a place nearby the water supply (not more than 3 Meters, water
pressure should be configured with between 0.1 MPa. and 0.6MPa.
. C
A onnect the inlet (Picture 1), to be sure there is no leakage.
(Picture 1)
B. Twist the valve to ensure air tightness when connecting.
C.
Please remove the cover of the inlet water connector and block head（firstly
remove the Claw)（Picture 3)，then insert the water pipe to inlet (insert
water pipe and install the claw. See（Picture 4）（Picture 5）
4
(Picture 2)