Advertisement
1
Carrier use for: Facing-In Position
*
Your baby should always be comfortable. If your baby is fussy it could be an indication that he or she is not properly
positioned. If this occurs, take your baby out immediately and adjust.
We recommend having another adult assist you if this is your first time using this type of carrier.
*
Baby must be carried in this position until baby is able to sit up on his or her own.
*
Support baby securely throughout the process of putting baby in the carrier, until all the buckles and straps are properly
*
fastened and adjusted.
When using this carrier in the facing-in position, you should fit it to the user before placing the baby in the carrier.
*
NOTE: The carrier parts in bold can be found on the carrier illustrations.
1.
Place the Waist Belt at your natural waist (at your
belly button). With the carrier hanging in front of you,
fasten the waist strap around your waist and buckle.
Tighten the Waist Belt by pulling on the Webbing.
The Waist Belt should fit firmly against your body.
* IMPORTANT! Always make sure the waist belt fits securely against
your body at all times. There should NOT be a gap between the Waist
Belt and your body.
* Make sure to slide the buckle Webbing through the Safety Elastic loop.
* Using the Safety Elastic - The Safety Elastic is an extra precaution,
intended to keep your baby safe in the event that the Waist Belt
Buckle comes undone while you are carrying baby. To use, follow
these simple steps:
1. Fasten Waist Belt Buckle, making sure Safety Elastic is on top of
the buckle.
2. Stretch the Safety Elastic to the right and pull the Waist Belt Strap
3. Tuck the Safety Elastic behind the Waist Belt Buckle.
2.
Hold baby to your chest. His or her legs should wrap
around your body.
With one hand on baby, use your other hand to bring
the carrier up over baby's back.
* Make sure baby is securely supported throughout the buckling
process. Baby is not secure until all the buckles and straps are
properly fastened and adjusted.
Hold your baby with your right hand and place the
3.
Shoulder Strap on your left side over your left
shoulder.
* NOTE: If you prefer to start with your left arm supporting baby, simply
swap right for left, and vice versa, in these instructions.
through the elastic loop.
5.
Hold your baby with your left hand on the outside of
4.
carrier, and place the right Shoulder Strap over your
right shoulder.
With Shoulder Straps in place reach behind your
5.
back to connect Chest/Back Buckle. If this is difficult
you may need to raise the Front Chest Strap on the
runner and loosen the Shoulder Straps. If you need
assistance, have another person fasten the buckle.
6.
Pull the Webbing on the Back Strap to tighten. The
Shoulder Straps should be wide and the Back/Chest
Strap should be straight across your back.
Adjust and tighten the Shoulder Straps by pulling
7.
the Webbing forward.
6.
Advertisement
