Technical Data; General Information; Safety Inspection; Service Contract - Kärcher HD 525 S Operation Manual

Safety inspection

You may arrange for a safety inspection with your
Kärcher dealer. Your dealer will be glad to advise
you.

Service contract

You may also take out a service contract with
your dealer.
The safety inspection is included in the service
contract. Your dealer will be glad to advise you.

Power connection

Voltage
Type of current
Connected load
Mains fuse (slow)

Water connection

Supply temperature (max.)
Supply rate (min.)
Supply hose – length (min.)
Supply hose – diameter (min.)
Suction height from open tank
at a water temperature of 20 °C
Supply pressure (max.)

Performance data

Operating pressure
Flow rate
Detergent intake
Recoil force of hand-held spray gun
at operating pressure (max.)
Sound pressure level (EN 60704-1)

Dimensions

Length
Width
Height
Weight without accessories

5. General Information

6. Technical Data

1~ 60 Hz
2000–8500 kPa

Safety equipment

When the hand-held spray gun is closed, the
overflow valve switches off the appliance via
a pressure-operated switch. The overflow valve
is also a safety device against exceeding the
maximum allowable working pressure.

Spare parts

A selection of the most common spare parts
numbers is listed at the end of these operating
instructions.
120 V
1.5 kW (2.0 hp)
15 A
60 °C
600 l/h (2.5 gpm)
7.5 m
½ in
1 m
12 bar
(300–1250 psi)
410 l/h (1.8 gpm)
0–25 l/h (0–7 gpm)
15 N
74 dB (A)
508 mm
225 mm
284 mm
16 kg
7