Machine Parameters And Performance - Philips Saeco Exprelia Series Service Manual

EXPRELIA
2.2.

Machine parameters and performance

Minimum
AMOUNT
amount
OF PRODUCT
Espresso
Long coffee
Pre-ground
Hot water
Steam for
frother
* Depends on the language selected by the user
RINSE
When performed
No. of pulses
Stopping option
User disable option
Disabling by Production/
Service department
No. of pulses user
adjustment option
No. of pulses adjustable
by Production/Service
department
Pulse range
(Min. – Max.)
Hardness Water hardness
1 Soft (up to 7°dH)
2 Medium (7° - 14°dH)
3 Hard (15° - 21°dH)
4 Very hard
(over 21°dH)
The default water hardness level is 3. Each litre of water corresponds to approximately 2,000
pulses
Saeco International Group
Default
amount
(Puls.) (Puls.)
50 130 - 170 *
70 200 - 230 *
Continues until the water supply has been exhausted (capacitive sensor)
When the machine is switched
on and the boiler temperature is
Yes, by pressing any key
Descaling cycle frequency
Maximum
amount
programmable
(Puls.)
600
600
Yes
Continues for 400 pulses
Initial rinse
≤ 50°C
130
Yes
No
No
No
No
Without water fi lter
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
Rev. 00 / June 2010
02 TECHNICAL SPECIFICATIONS
User Programm. by
Production / Service
Yes
Yes
Final rinse
When the machine is switched
off electronically, manually or
automatically after 60', if at least
one coffee has been dispensed,
before switching off
100
Yes, by pressing any key
No
No
No
No
No
With water fi lter
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
No
No
02
Page / 03