Using Your Phone - AEG ECLIPSE 10 Quick Start Manual

5.3 Base Unit (See P3)
# Icon
Lights up in Red when a handset is on the base to indicate it is charging.
12
Press to find/page all registered handsets. Press the button again, or any key on the handset
13
to turn off the page signal. Press and hold to start registration process.
5.4 Text and Number Entry
You can select different characters by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the phonebook or renaming your handset. The characters are printed on
the keys.
For example, to enter the name Tom:
T Press 8 once
O Press 6 three times
M Press 6 once
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
Once a character is selected, the cursor will move to the next position after a short pause.
Press to delete the last letter or number.
6

USING YOUR PHONE

6.1 Make a Call
6.1.1 Pre-dialling
Enter the phone number (maximum 24 digits). If you make a mistake, press
entered number.
Press to dial the phone number.
6.1.2 Direct Dialling
Press on your Handset.
Dial the number.
6.1.3 Call from the Redial List
Press in standby mode.
>The last number dialled is displayed.
Press to select the desired entry in the redial list and then press to dial out the selected redial
number.
Meaning
to delete the last