NB 902 User Manual page 15

5.7.2
Workout Mode - Setting Mode - Walk and Run stride
Set the
walkstride
calibrate
distance
[S/L]
Calibrate
Walk
[M]
[S]
Walk
Stride
Walk and Run Stride
• To get the accurate walk and run speed and
distance calculation, user need to enter their
personal walk and run stride.
• User can enter their personal walk and run stride
by selecting auto or manual calculation.
To auto set the Walk and Run Stride
• Select 'Calibrate walk or run distance' setting
under workout setting mode.
• Input the known distance by pressing [S] or
[R/V].
• Press [S/L] to start calibrating.
• User start to walk or run for the specific distance.
• When reaches, press [S] to finish calibration
• The watch will automatic calculate the walk/run
stride.
To manual set the Walk and Run Stride
• Select 'Calibrate walk or run stride' setting under
workout setting mode.
• Press [M] to enter 'Walk' or 'Run Stride' display
• When the digit is flashing, press [S] or [R/V] to
enter the value of the stride.