Synchronizing With A Server - Motorola MC35 User Manual

3 Ent er i ng In fo rm atio n
Using ActiveSync
4 Perform the steps below on your device.
(a)
(b)

Synchronizing with a server

The option to synchronize your device with a server is available when you first create a
partnership. Note that this option only synchronizes information for Contacts, Calendar,
Messaging (Outlook E-mail), and Tasks.
After your first full synchronization with Microsoft Exchange server, you can schedule
automatic synchronization between your device and the server every time an item
arrives or is changed in the Microsoft Exchange server.
Enable server synchronization only if you are certain that your company is running
Microsoft Exchange Server with Exchange ActiveSync. Before you can begin to
synchronize information with a server, you need to request the following information,
either from your service provider or from your corporate network administrator:
Your user name and password in your corporate network
•
The name of the Microsoft Exchange server
•
To set up synchronization with a Microsoft Exchange server:
1 Tap
34
Tap
> Programs
Tap Menu > Connect via Bluetooth.
Synchronization is automatically initiated. The PC to USB status icon
appears on the lower right corner of the Today screen.
If an Authentication is required, the Enter Passcode screen appears, type an
alphanumeric passkey (PIN code), then tap Next; enter the same passkey on
the other device.
The passkey is recommended for enhanced security. Your passkey must be
between 1 to 16 alphanumeric characters.
If you do not want to use a passkey, tap Next.
> Programs > ActiveSync
.
> ActiveSync
.