Toyota 2012 4runner Manual page 447

3-7. Other interior features
Floor mat
Use only floor mats designed specifically for vehicles of the same
model and model year as your vehicle. Fix them securely in place
onto the carpet.
CAUTION
Observe the following precautions.
Failure to do so may cause the driver's floor mat to slip, possibly interfering
with the pedals while driving. An unexpectedly high speed may result or it may
become difficult to stop the vehicle, leading to a serious accident.
When installing the driver's floor mat
■
Do not use floor mats designed for other models or different model year
●
vehicles, even if they are Toyota Genuine floor mats.
Only use floor mats designed for the driver's seat.
●
Always install the floor mat securely using the retaining hooks (clips) pro-
●
vided.
Do not use two or more floor mats on top of each other.
●
Do not place the floor mat bottom-side up or upside-down.
●
Before driving
■
4RUNNER_U
Fix the floor mat in place using
the retaining hooks (clips) pro-
vided.
The shape of the retaining
hooks (clips) and the fixing
procedure of the floor mat for
your vehicle may differ from
those shown in the illustration.
For details, refer to the floor
mat retention clip installation
instructions supplied with the
clips.
Check that the floor mat is securely
●
fixed in the correct place with all the
provided retaining hooks (clips). Be
especially careful to perform this check
after cleaning the floor.
With the engine stopped and the shift
●
lever in P, fully depress each pedal to
the floor to make sure it does not inter-
fere with the floor mat.
3
473