2-2. Instrument cluster
When the average fuel consumption is reset
■
The average fuel consumption displayed on the instrument cluster and "Past
Record" screen of the Display Audio system (if equipped) or the navigation
system (if equipped) will be reset at the same time.
Adjusting the brightness of the accessory meter
■
If left idle for approximately 6 seconds or more while adjusting, the dis-
●
play will revert to the trip information display.
When the parking lights are on, the brightness of the accessory meter
●
can be adjusted only with the instrument panel light control.
If the "MODE/
●
light control is displayed, the display will switch to compass calibration.
(→P. 474)
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem with continu-
ing to use the display.
NOTICE
The accessory meter at low temperatures
■
Allow the interior of the vehicle to warm up before using the liquid crystal dis-
play. At extremely low temperatures, the display monitor may respond
slowly, and display changes may be delayed.
202
4RUNNER_U
" button is pressed and held when the accessory meter