Asus H110I User Manual page 14

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
7. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
8. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.
•
•
9. DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
10. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
1-6
Headset
2.1-channel
Line In
Line Out
Mic In
-
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
Due to the limitation of USB 3.0 controller, USB 3.0 devices can only be used under
Windows OS environment and after the USB 3.0 driver installation.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
4.1-channel
Rear Speaker Out Rear Speaker Out
Front Speaker Out Front Speaker Out
Mic In
-
5.1-channel 7.1-channel
Rear Speaker Out
Front Speaker Out
Bass/Center Bass/Center
- Side Speaker Out
Chapter 1: Product introduction