2.1.3 Removing the heat sink
(See Fig.4)
(1) Remove the two screws B and two screws C on the left
side of the main body.
2.1.4 Removing the bottom cover
(See Figs.5 and 6)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints c, two joints
d and joint e .
CAUTION:
Do not damage the main board when releasing the joint e us-
ing a screwdriver. (See Figs.5 and 6)
Heat sink
C
Fig.4
Joint c
Joint e
Fig.5
Bottom cover
Joint c
Fig.6
KD-S747
B
Bottom cover
Joint d
Joint d
Joint e
(No.49822)1-5