Kohler command cv17 Service Manual page 9

TORQUE SPECIFICATIONS
Crankcase
Breather Cover Fastener
Oil Drain Plug
Cylinder Head
Head Fastener
Nut (torque in 2 increments)
Bolt (torque in 2 increments)
Rocker Arm Screw
Flywheel
Fan Fastener
Flywheel Retaining Screw
Fuel Pump
Fastener
Governor
Lever Nut
Ignition
Spark Plug
Module Fastener
Rectifier-Regulator Fastener
Muffler
Retaining Nuts
Oil Cooler
Adapter Nipple
Oil Sentry
™
Pressure Switch
Oil Pan
Fastener
Solenoid (Starter)
Mounting Hardware
Nippondenso Starter
Delco-Remy Starter
Nut, Positive (+) Brush Lead
Nippondenso Starter
Delco-Remy Starter
Speed Control Bracket
Fastener
Values are in Metric units. Values in parentheses are English equivalents.
3
Lubricate threads with engine oil prior to assembly.
5
24 690 07 Rev. H
CV17
3,5
KohlerEngines.com
CV18/CV20/ CV22/CV23/
CV22/ CV620/
CV620/CV621/ CV640/
CV640/CV641 CV670/CV680
7.3 N·m (65 in. lb.)
13.6 N·m (10 ft. lb.)
first to 16.9 N·m (150 in. lb.)
finally to 35.5 N·m (315 in. lb.)
first to 22.6 N·m (200 in. lb.)
finally to 41.8 N·m (370 in. lb.)
18.1 N·m (160 in. lb.)
9.9 N·m (88 in. lb.)
66.4 N·m (49 ft. lb.)
2.3 N·m (20 in. lb.)
6.8 N·m (60 in. lb.)
27 N·m (20 ft. lb.)
4.0-6.2 N·m (35-55 in. lb.)
1.4 N·m (12.6 in. lb.)
24.4 N·m (216 in. lb.)
27 N·m (20 ft. lb.)
4.5 N·m (40 in. lb.)
24.4 N·m (216 in. lb.)
6.0-9.0 N·m (53-79 in. lb.)
4.0-6.0 N·m (35-53 in. lb.)
8.0-12.0 N·m (71-106 in. lb.)
8.0-11.0 N·m (71-97 in. lb.)
10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
Specifications
CV25/ CV750
CV730/
CV740
9