Descriptions Of Symbols And Display Fields - ABB UNO-7.6-TL-OUTD-S-US-A Product Manual

D
escriptions of symbols and display fields
b1 -Indicates the transmission and reception of data through the RS-485 line
b2 - Indicates the presence of the RS-485 communication line
b3- Reports the presence of a line of radio communication (Radiomodule card installed)
b6- Warning symbol indicates presence of power limiting, input voltage out-of-range
b11-Graph of the power fed into the grid (from 0 to 100%). The time scale is settable to 8, 16, or 24 hours.
or power limitation imposed by the grid
b7- Reports power limiting due to high internal temperature
b8- Instantaneous power generated for the grid
b9- MPPT SCAN function activated
b13- Displays the energy produced over a day
b12- Displays the total energy produced since installation of the inverter
- 46 -
b10- Lines of text for the cyclical display of
parameters, error codes, and menus
Mon
b19- Output AC voltage
b18- Indicates the circuit for
conversion from DC to AC
b17- Indicates DC/DC input currrent
b16- DC current value
b15- DC voltage value
b14- Indicates the PV array voltage is higher than the
Vstart of the inverter and array 1/2
4 - Operations
b22- Status
of AC grid
b21- Connection
to the grid
b20- Output AC current