1
3
4
6
5
Air filter (For MX360)
1. Remove the air filter case cover nut and then
remove the air filter case cover.
1 Air filter case cover nut
2
2 Air filter case cover
2. Remove the wing nut and then remove the air fil-
ter assembly.
3 Wing nut
4 Air filter assembly
3. Remove the foam element.
5 Foam element
6 Air filter
4. Wash the foam element in solvent and dry it.
WARNING
Never use solvent while smoking or in the vicinity
of an open flame.
5. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
Recommended oil:
Foam-air-filter oil or engine oil (See page 36)
NOTICE
Do not wring out the foam element when squeez-
ing it. This could cause it to tear.
– 38 –