Operation; Subwoofer; Activating And Deactivating - Teufel system 7 Technical Description And Operating Instructions

5.1 home theater speaker set with thx select 2 certificate

Hide thumbs Also See for system 7:

Table of Contents

Operation

• With the switch 6 "Power" you can turn the power sup-

ply voltage on or off. After turning on, the subwoofer is

in standby and the power LED 10 "Power" is illumi-

nated in red. If the subwoofer is on, the power LED 10

"Power" will be illuminated in green.

You can control all other functions with the remote control:

• Switch on and to standby: Push the button 13 " ".

Note: If the subwoofer is not deactivated with the but-

ton 13 " ", it will automatically switch to standby if no

audio signal is present for 20 minutes. As soon as an

audio signal is sent, the subwoofer will automatically

activate for music playback.

You can exit this auto-on mode by switching the sub-

woofer to standby with the button 13 " ".

• Increase the volume: Push the button 14 "+".

• Decrease the volume: Push the button 16 "–".

• Set the volume to THX level: Push the button 17 "THX",

the display 12 "THX" is illuminated in red.

• Mute the subwoofer: Push the button 18 " ". The

power LED 10 "Power" ﬂ ashes in green.

• Turn the sound back on: Push the button 18 " " again

or adjust the volume.

• System 7 with THX

Select 2

certiﬁ cate

Table of Contents