Dram Timing Control - Asus H170M-PLUS Instruction Manual

2.5.3 DRAM Odd Ratio Mode [Enabled]
Allows you to enable or disable the Odd Ratio Mode, which provides better granularity.
Configuration options: [Disabled] [Enabled]
2.5.4 DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting. Configuration options: [DDR4‑800MHz] [DDR4‑933MHz] [DDR4‑1066MHz] [DDR4‑
1200MHz] [DDR4‑1333MHz] [DDR4‑1400MHz] [DDR4‑1500MHz] [DDR4‑1600MHz]
[DDR4‑1700MHz] [DDR4‑1733MHz] [DDR4‑1800MHz] [DDR4‑1866MHz] [DDR4‑1900MHz]
[DDR4‑2000MHz] [DDR4‑2100MHz] [DDR4‑2133MHz] [DDR4‑2200MHz] [DDR4‑2266MHz]
[DDR4‑2300MHz] [DDR4‑2400MHz] [DDR4‑2500MHz] [DDR4‑2533MHz] [DDR4‑2600MHz]
[DDR4‑2666MHz] [DDR4‑2700MHz] [DDR4‑2800MHz] [DDR4‑2900MHz] [DDR4‑2933MHz]
[DDR4‑3000MHz] [DDR4‑3066MHz] [DDR4‑3100MHz] [DDR4‑3200MHz] [DDR4‑3333MHz]
[DDR4‑3466MHz] [DDR4‑3600MHz] [DDR4‑3733MHz] [DDR4‑3866MHz] [DDR4‑4000MHz]
[DDR4‑4133MHz] [DDR4‑4266MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.5.5 GPU Boost [Keep Current Settings]
Enable this item to accelerate the integrated GPU for extreme graphics performance.
Configuration options: [Keep Current Settings] [Enabled]
2.5.6 EPU Power Saving Mode [Disabled]
ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best
energy saving condition. Configuration options: [Disabled] [Enabled]
2.5.7 CPU SVID Support [Auto]
Disabling SVID Support stops the processor from commmunicating with the external voltage
regulator. Configuration options: [Auto] [Disabled] [Enabled]
2.5.8

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2-22 Chapter 2: Getting started