Table of Contents
Advertisement
Notes
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 72).
• If you set "DTS" to "D-PCM" (page 78), the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, MPEG audio, and
Dolby Digital sound tracks in this order.
MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 40 different DVD VIDEOs/
VIDEO CDs (page 28).
ON
Stores the resume setting in
memory for up to 40 discs.
OFF
Does not store the resume
setting in memory. Playback
restarts at the resume point only
for the current disc in the player.
Note
If you run Quick Setup, Multi-disc Resume setting
stored in memory may return to the default settings.
DivX
Displays the registration code for this player.
For more information, go to
http://www.divx.com
on the Internet.
AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO
Normally, select this. Outputs
audio signals according to the
"DIGITAL OUT" settings
(page 77).
PCM
Converts Dolby Digital, DTS,
or 96 kHz/24 bit PCM signals to
48 kHz/16 bit PCM.
Note
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/DTS signals and "AUTO"
is selected. In this case, select "PCM."
76
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 71).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
– LINE OUT L/R (AUDIO) jacks
– 5.1CH OUTPUT jacks
OFF
Normally, select this position.
ON
Select this when the playback sound
from the speakers is distorted.
AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-VR mode only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC."
This function affects the output from the
following jacks:
– LINE OUT L/R (AUDIO) jacks
– 5.1CH OUTPUT jacks
– DIGITAL OUT (OPTICAL or COAXIAL)/
HDMI OUT jack only when "DOLBY
DIGITAL" is set to "D-PCM" (page 77).
STANDARD Normally select this position.
TV MODE
Makes low sounds clear even if
you turn the volume down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
OFF
STANDARD
SHARP
DOLBY SURROUND
ON
D-PCM
PCM
D-PCM
48kHz/16bit
Advertisement
Table of Contents
