Table of Contents
Advertisement
Checking the audio signal
format
You can check the audio signal format by
pressing
/AUDIO repeatedly during
playback. The format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Rear (L/R)
1 : ENGLISH DOLBY DIGITAL
Front (L/R)
+ Centre
Currently playing programme format
Example:
Dolby Digital 3 ch
Front (L/R)
2 : SPANISH DOLBY DIGITAL
Currently playing programme format
When playing a DivX video file on a DATA
CD or a DATA DVD
Example:
MP3 audio
1:
MP3 128k
44
LFE (Low Frequency Effect)
3 / 2 .1
L
C
LFE
LS
RS
Rear (Monaural)
2 / 1
L
S
Bit rate
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Note
R
If "DTS" in "AUDIO SETUP" is set to "D-PCM,"
the DTS track selection option will not appear on
the screen even if the disc contains DTS tracks
(page 78).
R
Advertisement
Table of Contents
