Master/Slave Mode - Bargeheights LED 54AW User Manual

Master/Slave Mode

Up to 32 LED 54AWs may be connected via the 3-pin DMX con-
nections and controlled simultaneously without a DMX control-
ler by using Master/Slave Mode. In this mode you can set one
fixture in the line to act as the master controller – and up to 32
other fixtures can be connected and will mirror the operation of
the Master.
• Select the desired standalone mode on the Master LED 54AW.
• Set the DMX address of each Slave fixture to .
A001
• Make sure the Master is the first fixture in the line connected
via the 3-pin DMX connections on the rear of the LED 54AW.
Page 12 LED 54AW User Manual rev. A