Table of Contents
Advertisement
Standalone Control Modes
The LED 54AW has several standalone control modes that do
not require a DMX control signal.
• Press <MENU> then press <UP> or <DOWN> until
or
3L--
3l--
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the level of that color (Amber, White 1, or White 2)
• The LED 54AW will stay on in the selected color until the
mode is changed.
is Strobe Mode. The LED 54AW will strobe in varying
FLAS
speeds from
FL00
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
is Color Fade Mode. The LED 54AW will fade colors in
FAdE
varying speeds from
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
is Color Cycle Mode. The LED 54AW will switch colors in
ASC-
varying speeds from
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
is Sound Control: Color Cycle Mode. The LED 54AW will
SOUA
respond by changing color to music or sounds via its onboard
microphone.
is Sound Control: Strobe Mode. The LED 54AW will re-
SOUF
spond by flashing to music or sounds via its onboard micro-
phone.
©2010 Bargeheights, Inc.
is displayed.
to
.
FL12
to
FA00
to
AS00
to
FL00
FL12
.
FA12
to
FA00
FA12
.
AS12
to
AS00
AS12
).
).
).
or
AL--
is
FLAS
is
FAdE
is
ASC-
Page 11
Advertisement
Table of Contents
