Setup Menu - Sony Bravia KDL-52X2000 Operating Instructions Manual

Setup menu

Timer Settings
Auto Startup
Power Saving
28
GB
Sets the timer to switch on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
up in orange.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off".
• "TV will soon turn off by Sleep Timer" appears on the screen one minute before the TV
switches to standby mode.
On Timer
Sets the timer to switch on the TV from standby mode.
"Day": Selects the day on which you want to activate the On Timer.
"Time": Sets the time to switch on the TV.
"Duration": Selects the time period after which the TV automatically switches to
standby mode again.
"Volume Setup": Sets the volume for when the timer switches on the TV.
Clock Set
Sets the clock using the following menu selections in "Time Adjustment".
"Auto": The clock is set automatically when a digitally broadcast time signal is
received.
"Manual": Sets the clock manually when digital channels have not been stored, or
when you cannot receive the time correctly. Set the "Day" and "Time".
Starts the "first time operation menu" to tune in available digital and analog channels
and set the time. Usually, you do not need to do this operation because channels
already tuned when the TV was first installed (page 6). However, this option allows
you to repeat the process (e.g. to retune the TV after moving house, or to search for
new channels that have been launched by broadcasters).
Selects the power saving mode to reduce the power consumption of the TV.
When "Picture Off" is selected, the picture is switched off and the
indicator on the TV (front) lights up in green. The sound remains unchanged.
You can select the options listed below on the Setup
menu. To select options in "Settings", refer to "Picture
menu" (page 21).
(Timer) indicator on the TV (front) lights
(Picture Off)