Page 1
*314410* TE 505 314410 Operating instructions Mode d’emploi Manual de instrucciones...
Page 2
Safety precautions 11. Secure Work. Use clamps or a vise to hold work. It’s 18. Stay Alert. Watch what you are doing. Use common safer than using your hand and it frees both hands to oper- sense. Do not operate tool when you are tired. for double-insulated tools ate tool.
On/off switch of trigger bull design Kit supplied with the machine: Electronic r.p.m. regulation for improved operating convenience Plastic case, cleaning cloth, Hilti insert tool grease, operating instructions Hammering power regulation: max. = 100%, min. = 50% Double insulation, class II, CENELEC HD 400...
Page 4
Fig. 7: Regulating the hammering power As the cross-section of a worn wide-flat chisel is not 3. Do not apply excessive pressure to the TE 505 – Set the TE 505 at the symbol « larger hammer sufficient for reforging, these chisels should not be this will not increase its performance.