For your safety Safe operation of this tool is possible Danger of explosion! The hot air tool only when the operating instructions can explosively ignite combustible fluids and gases. Do not work in a and the safety precautions are read completely and the instructions con- potentially explosive...
Adjusting the Temperature Intended Use HLG 1800: The hot air temperature is preset in both hot air positions and cannot be adjusted. The tool is intended for the deforming and bonding plastic, for removal of paint coatings and for Hot air position I: 400 °C...
HLG 2300-LCD: Memory Function Button “S” 6 is used to memorise changed settings: Switching On / Off (cool air – hot air) – Call up any program The On/Off switch 3 has 2 settings: – Set the temperature and blower stage; the xy Cool air position symbol flashes...
Maintenance and Cleaning Noise/Vibration Information Typically the A-weighted sound pressure level of the Before any work on the tool itself, pull the mains tool is 70 dB (A). plug. For safe and proper working, always keep the tool and the ventilation slots clean. Declaration of Conformity Avoid sucking in dust or sawdust, as this will cause the tool to malfunction.