11
SERVICE WORK ON THE CHASSIS
11.27
Sealing the air filter box
11.28
Removing main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
11.29
Installing the main silencer
11.30
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
–
Check the intake flange for damage and firm seating.
Finishing work
–
Install the air filter.
–
Install the air filter box lid. (
x
–
Seal the air filter box in the marked area
401527-10
–
Disconnect spring
–
Remove screws
101353-10
–
Mount the main silencer. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Reconnect spring
101353-11
Preparatory work
–
Remove the main silencer. (
(
p. 54)
x
p. 53)
A
.
1
and take off main silencer.
2
.
2
x
p. 55)
.
.
1
M6
10 Nm (7.4 lbf ft)
55