Panasonic AW-HE60SE Operating Instructions Manual page 83

Controls and settings from web screen
q Multi‑screen
p
The cameras whose images are to be displayed on the multi screen are set here.
Multi‑screen setup screen
 IP address
[1 to 128 half‑size characters]
<Initial setting: blank>
Input here the IP address of the camera whose images
are to be displayed on the multi screen or the host name.
With one group consisting of 4 cameras, up to four groups
of cameras (a total of 16 cameras) can be registered.
Input as follows if the HTTP port number of the camera
whose images are to be displayed has been changed.
Example of input:
Address 192.168.0.10: 8080
p  When the host name is to be set, the DNS setting of
the personal computer that will display the multi screen
is required (see page 89).
(continued)
 Camera title
[0 to 20 half‑size characters]
<Initial setting: blank>
Input the camera title here. The camera title which has
been input is displayed on the multi screen.
p  When a multi screen with 16 sub-screens has been
selected, the camera titles may be displayed only in
part.
83