Panasonic AW-HE60SE Operating Instructions Manual page 38

Basic operations
q Procedure for camera menu operation
p
(AW‑RP555)
1
Press one of the [1] to [5] buttons of
[CONTROL] to select the unit which is to be
operated.
2
Press the [MENU] button of the AW‑RP555 for
2 seconds.
The camera menu of the AW-HE60 is displayed on the
monitor.
3
Perform one of the following steps to select the
menu item.
If the [YES] button is pressed, the selection item moves
up; if the [NO] button is pressed, it moves down.
4
Press the [ITEM] button.
The value of the item to be set starts blinking.
5
Press the [YES] or [NO] button to change the
setting.
6
After deciding on the setting, press the [ITEM]
button.
The value of the item to be set is entered, and it stops
blinking.
7
Press the [MENU] button for 2 seconds to exit
the camera menu.
38
(continued)
Note
p  It may be necessary to upgrade the software version
in order to operate an AW-HE60 from an AW-RP555.
Ask your dealer for details.