Weight Only Operation - GoWISE USA GW22027 Instruction Manual

d) If there is only one user whose last weight data is close to the current one,
it will be selected
three mes and then the scale turns off.
e) If there is more than one user whose last weight data is close to the
current one, it will be selected
repeatedly for three
f) Press the "
" " for "P2".
g) Note: If there is no
h) When the measurement is completed, the results appear repeatedly for
three mes and then the scale will turn off.
i) NOTE: Before using
please select your No. to measure once at least, or failed iden

WEIGHT ONLY OPERATION

Your GoWISE USA Digital Body Fat Scale will operate as conven onal weight-reading
scale. No special programming steps are required.
Once the scale is
measure your current weight. For only weight reading:
1. n the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step onto the scale
weight.
3. The scale will save your weight value.
4. The scale will
5 seconds.
. The results will be shown repeatedly for
s and then the scale turns off.
" or " " to select the user. Press "
on, the scale will turn off
c user
, as previously described, you may simply step on the scale to
m and remain
cally turn off
10
. The results will be shown
n measuring method,
l while the scale computes your
r
" to select "P1" and
r about 40s.