When the LCD displays "Lo", replace the
s at the same
The scale needs to be
the scale
. The display will show a running zeros
Your scale is now ready for use.
WEIGHT-ONLY OPERATION
Your GoWISE USA Digital Body Fat Scale will operate as a
special programming steps are required.
Once the scale is
measure your current weight. For only weight reading:
1.
n the scale on a flat hard surface. Carpeted
or uneven floors may affect accuracy.
2. Step onto the scale
the scale computes your weight.
3. The scale will save your weight.
4. The scale will
USING YOUR BODY FAT SCALE
In order to measure body fat and body mass index, you must first enter your height, age and
gender (in athlete mode if applicable). The scale uses these parameters to calculate your
measurements. Screen prompts will lead you through programming your personal
into the scale. The scale will then use the data to compute your measurement results.
NOTE: Athlete mode uses
individuals—persons who do 10 hours or more per week of aerobic
heart rate of 60 beats per minute. The scale is not calibrated for professional athletes or body
builders.
Bare feet are required for the analyzer to f
Remove your shoes and socks before beginning the measurement. In order to ge he most
accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly damp
before stepping onto the scale.
; do not combine old and new
alized before first use and a
, as previously described, you may simply step on the scale to
m and remain s l while
y turn off
r 5 seconds.
l
e to calculate more accurate results for highly fit
s with the "+" signs up. Replace both worn
r
y replacement. Press firmly on
n and
on properly:
7
y turn off.
l weight-reading scale. No
y and have a