Installation - EcoSpring ES300 Installation & Owner's Manual

Outdoor Installation
Installation with    cover
Outdoor water proof cover seperate the inlet
and outlet air
Air outlet Air inlet
190mm
Duct Description
Air inlet and outlet both connect with ducts.
A B
Air outlet
Installation take advantage of warmer air source and cooler
air dispensed for other us
Different duct connection may result in slightly different system
efficiency
Installation & Ownerʻs Manual
6
PTR Valve
Anode & Coil
Water inlet &
outlet
Fig.3-7
A+B≤10m
Air inlet
≥100mm
PTR Valve
Anode
Water inlet &
outlet
Fig.3-8

4. INSTALLATION

≥100mm
Ask your installer to install the air-source heat pump water
heating unit. Incorrect installation performed may result in
water leakage, electric shock, or fire.
Unit installed in a complete unsheltered open area is not
Display
allowed.
The unit must be securely fixed and level, or else may result in
noise and vibration.
Make sure that there is      space around the unit.
In places where there is strong wind such as seashore or
hillside, fix the unit in a location protected from the wind.
Carry the unit onto the site
In order to avoid scratch or deformation of the unit surface,
apply guard boards to the contacting surface.
Do not incline the unit more than 45° when moving, and
keep it vertical when installing.
This system is very heavy, it need to be carried by 2 or more
people, otherwise may cause injury or unit damage.
Install the unit.
The circulating air for every unit should be more than 700m
Make sure there is enough installation space.
≥150mm
Outline dimensional drawing(see Fig.4-1,Fig.4-2)
Display
WARNING
650 mm
ES300 Installation & Owner's Manual
/h.
3
Fig.4-1
7