EcoSpring ES300 Installation & Owner's Manual page 6

Do not install the unit near the following.
Place like kitchen where oil permeates.
Place where strong electromagnetic waves exist.
Place where flammable gases or materials exist.
Place where acid or alkali gases evaporate.
Other special environments.
Note:
Use appropriate tools and equipments to transport the unit,
and ensure the unit is not damaged during transportation.
If the unit has to be installed on a metal part of the building,
electric insulation must be installed, and the installation must
meet relevant AS/NZS standards for electric devices.
The insataller will need to check on water quality before
installation. This could have an impact on the operation of the unit
and the warranty.
Installation space and duct connection
Before installing the unit, leave enough space for sufficient air
flow and ease of maintenance as shown in figure 3-1 to 3-6
below.
Indoor installation
A
Air outlet
PTR Valve
Anode & Coil
Water inlet &
outlet
B
Air inlet
Fig.3-1
≥100mm
≥150mm
Display
Fig.3-2
A
Air outlet
Air inlet
≥450mm
PTR Valve
≥100mm
Anode & Coil
Water inlet &
outlet
Display
B
Air outlet Air inlet
≥100mm
PTR Valve
≥600mm
Anode& Solar
Coil
Display
Water inlet&
outlet
Fig.3-6
Installation & Ownerʻs Manual
ES300 Installation & Owner's Manual
Fig.3-3
≥500mm
Fig.3-4
Fig.3-5
≥150mm
5
6