Table of Contents
Advertisement
ACCESSORIES
U l t r a S a v e r
The optional Ultra Saver requires no installation and allows you to
power your telephone from a vehicle's battery via the cigarette
lighter. This is particularly valuable when driving rental cars. While
using the Ultra Saver, you conserve your phone's battery, and also
provide a slow charge to the battery. To attach the Ultra Saver to
your phone, locate the metal contacts on the flat side of the Ultra
Saver connector, as well as those on the bottom-rear of the phone.
Match the metal contacts together, making sure that the white dot
on the Ultra Saver connector faces the same direction as the front
of the telephone. You will hear a click to indicate that the connec-
tion has been properly made. Plug the Ultra Saver into the vehicle's
cigarette lighter socket.
Your telephone will now be powered by the vehicle's battery rather
than the telephone's battery. The keypad backlighting and display
will remain on as long as the Ultra Saver is attached to the unit and
plugged into the vehicle.
NOTE: The Ultra Saver has a three-amp fuse, which you may
replace yourself if necessary.
To remove the Ultra Saver from the phone, use one of the two fol-
lowing methods.
Standard Method
Turn off your telephone, then squeeze both sides of the Ultra Saver
connector until the tabs release. Then remove the connector from
the rear of the phone.
Quick Change Method
This method allows you to unplug your telephone from the Ultra
Saver during a telephone call without losing the call. Unplug the
43
Advertisement
Table of Contents
