Before First Use - Mistral Whirly Cream MSIM10 User Manual

Getting to know your Whirly
Cream Soft Serve Maker
Congratulations on the purchase of your new Mistral
Soft Serve Maker.
Before first using your Mistral Soft Serve Maker,
it is most important that you read and follow the
instructions in this use and care booklet, even if you
feel you are quite familiar with this type of appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a place
and keep this booklet handy for future reference.
This appliance has been designed to operate from a
standard domestic power outlet. It is not intended for
industrial or commercial use.

Before First Use

• Carefully unpack the Soft Serve Maker, remove
all packaging material and discard plastic bags
correctly.
• Wash the canister, lid and paddle in warm soapy
water and dry thoroughly. These parts are not
dishwasher safe.
• Use a damp cloth to clean the exterior of the
motor. Do not immerse in water.
How To Use Your Mistral
Whirly Cream Soft Serve
Maker
Step 1 – Freezing the Canister
1. Remove the cleaned canister and wrap in a
plastic bag (prevents freezer burn).
2. Place the wrapped canister in the back of the
freezer, where the temperature is the coldest.
3. The length of time required to properly freeze
the bowl depends on what temperature your
freezer is set at. Please refer to the table
following, to estimate the necessary length of
time needed to sufficiently freeze the canister.
Freezer
Temperature
-30°C
-25°C
-18°C
-15°C
For optimum results the temperature of the
canister should be between -15 to -20°C in
addition to the prepared mixture being chilled to
1-4°C (This can be achieved by leaving the soft
serve mixture in the fridge overnight).
Note: The canister must be used immediately
after being withdrawn from the freezer. Do not
leave to thaw out before use.
4
Min. Freezing
Time
8 - 9 hrs
12 - 14 hrs
20 - 22 hrs
24 hrs +