Table of Contents
Advertisement
TG8611PD(e-hg).book Page 15 Friday, March 18, 2011 1:31 PM
Making calls
1
Lift the handset and dial the phone
number.
L To correct a digit, press ^.
2
Press {C} or ].
3
When you finish talking, press {ic} or
place the handset on the charger.
Using the speakerphone
1
Dial the phone number and press {s}.
L Speak alternately with the other party.
2
When you finish talking, press {ic}.
Megjegyzés:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{s}/{C}.
Adjusting the receiver or speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
j (right soft key) or {>} (R)
2
{r}: Select the desired phone number.
3
{C}/{s}
L If {s} is pressed and the other party's
line is engaged, the unit automatically
redials multiple times. While the
handset is waiting to redial, the ringer
indicator flashes. To cancel, press
{ic}.
Erasing a number in the redial list
1
j (right soft key) or {>} (R)
2
{r}: Select the desired phone number.
s W
3
{r}: "IGEN" s M s {ic}
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
Making/Answering Calls
and/or PIN in the phonebook, a pause is also
needed (19. oldal).
Példa: If you need to dial the line access
number "0" when making outside calls with
a PBX:
1
) s l
2
Dial the phone number. s {C}
Megjegyzés:
L A 3 second pause is inserted each time
l is pressed. Repeat as needed to
create longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer the call by
pressing any dial key from ) to 9,
*, or (. (Any key answer feature)
2
When you finish talking, press {ic} or
place the handset on the charger.
Auto talk
You can answer calls simply by lifting the
handset off the charger. You do not need to
press {C}. To turn this feature on, see 25.
oldal.
Adjusting the handset ringer volume
■ While the handset is ringing for an
incoming call:
Press {^} or {V} repeatedly to select the
desired volume.
■ Programming the volume beforehand:
1
1 (middle soft key) (16)
2
{r}: Select the desired volume.
3
M s {ic}
Temporary handset ringer off
While the handset is ringing for a call, you
can turn the ringer off temporarily by pressing
L.
15
Advertisement
Table of Contents
