Advertisement
20. Open the fuse case covers, and check the rating of
each fuse. Attach the fuse labels (OPTION 5 A/2 A)
to the fuse cases on the keyless entry harness.
HOOD
OPENER
LEVER
21. Remove the bolt that secures the top of the hood
opener lever, then attach the ground terminal of
the keyless entry harness with the ground bolt
from the kit.
22. Attach the fuse label (KEYLESS ENTRY 2 A) to
the fuse case on the keyless entry harness.
KEYLESS ENTRY
HARNESS FUSE CASE
BLUE
TAPE
23. Under the fuse box, locate the 4-pin connector
blue-taped to the vehicle harness, and remove the
blue tape to free the connector. Plug the 4-pin
connector of the keyless entry harness into the
4-pin connector you just freed.
6 of 7
KEYLESS
ENTRY
HARNESS
KEYLESS
ENTRY
HARNESS
FUSE
CASE
FUSE LABEL
(5 A)
FUSE
LABEL
(2 A)
GROUND
BOLT
(Provided.)
VEHICLE BOLT
(Discard.)
KEYLESS
ENTRY
HARNESS
FUSE LABEL
(OPTION 2 A)
KEYLESS ENTRY
HARNESS
4-PIN CONNECTOR
VEHICLE 4-PIN
CONNECTOR
AII 23619 (0205)
24. Under the fuse box, push in the vehicle 1-pin
connector to remove it from the vehicle
connector, then remove the tape securing the
vehicle 1-pin connector. Unplug the vehicle
1-pin connectors, and plug the 1-pin connectors
of the keyless entry harness between the
vehicle 1-pin connectors you just unplugged.
Reinstall the vehicle 1-pin connector.
VEHICLE
1-PIN
CONNECTOR
Push.
TAPE
VEHICLE 1-PIN CONNECTOR
25. Using isopropyl alcohol on a shop towel,
thoroughly clean the instrument panel side frame
bracket in the area shown. Cut a cushion tape into
halves, and attach the two pieces to the side
frame bracket as described.
CUSHION TAPE
INSTRUMENT
PANEL SIDE
FRAME
BRACKET
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
KEYLESS ENTRY HARNESS
1-PIN CONNECTOR
FUSE
BOX
KEYLESS
ENTRY
HARNESS
TAPE
VEHICLE
CONNECTOR
CUSHION TAPES (1/2 PIECES)
Advertisement
