Advertisement
15. Above the parking brake pedal bracket, locate the
3-pin connector blue-taped to the vehicle harness,
and remove the blue tape to free the connector.
Plug the 3-pin connector of the keyless entry
harness into the 3-pin connector you just freed.
KEYLESS ENTRY HARNESS
BLUE TAPE
VEHICLE
3-PIN
CONNECTOR
PARKING
BRAKE PEDAL
BRACKET
KEYLESS ENTRY HARNESS
3-PIN CONNECTOR
16. Route the 6-pin connectors of the keyless entry
harness to the switch trim opening. Plug the 6-pin
connectors between the interior light switch and
the interior light switch harness connector.
Reinstall the switch trim.
SWITCH TRIM
OPENING
INTERIOR LIGHT
SWITCH HARNESS
CONNECTOR
INTERIOR LIGHT
SWITCH HARNESS
CONNECTOR
KEYLESS ENTRY HARNESS
6-PIN CONNECTOR
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
KEYLESS ENTRY
HARNESS 6-PIN
CONNECTOR
SWITCH
TRIM
INTERIOR
LIGHT SWITCH
KEYLESS
ENTRY
HARNESS
AII 23619 (0205)
17. Unplug the vehicle 10-pin connector from the fuse
box, and plug the two 10-pin connectors of the
keyless entry harness in between.
KEYLESS ENTRY
HARNESS
10-PIN CONNECTOR
FUSE BOX
VEHICLE 10-PIN
CONNECTOR
18. Above the fuse box, locate the gray 2-pin
connector blue-taped to the vehicle harness. This
connector is difficult to see, it is behind a gray 4-
pin connector. Pull the gray 4-pin connector down
and out of the clip on the instrument panel
bracket. Remove the blue tape securing the gray
2-pin connector and pull it out.
TAPE
VEHICLE 2-PIN
CONNECTOR
(Gray)
FUSE
BOX
19. Below the fuse box, locate the brown 2-pin
connector. Plug the keyless entry harness 2-pin
connectors into the brown connector and into the
gray 2-pin connector from step 18. Reinstall the
gray 4-pin connector.
KEYLESS
ENTRY
HARNESS
CLIP
VEHICLE 4-PIN
CONNECTOR
KEYLESS
ENTRY
HARNESS
KEYLESS ENTRY
HARNESS 2-PIN
CONNECTOR
VEHICLE 2-PIN
CONNECTOR (Brown)
5 of 7
Advertisement
