Related Manuals for Extech Instruments MO295
Summary of Contents for Extech Instruments MO295
- Page 1 User's Guide Pinless Moisture/Humidity Meter with Memory + IR Thermometer Model MO295 mBAR STORE MO295 ShopExtech 1.877.766.5412 Shop for Extech products at: .com...
-
Page 2: Meter Description
Introduction Congratulations on your purchase of the Extech MO295 Pinless Moisture Meter with Patented Built-in IR Thermometer and 20 Point Memory. Monitor moisture in wood and other building materials with no surface damage with the Pinless Moisture sensor (Pin-type Moisture Probe included). Measure Humidity and Air Temperature with built-in probe plus non-contact InfraRed Temperature with patented IR design. -
Page 3: Battery Replacement
/ accumulators at collection points in your community or wherever batteries / accumulators are sold! Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13... -
Page 4: Operation
Press the MOIST button twice to select Moisture measurement.” MOIST”, and “EXT” (external pin probe) will appear in the display. Press the probe pins into the material and read the % moisture content in the display. ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13... - Page 5 WARNING: Do not directly view or direct the laser pointer at an eye. Low power visible lasers do not normally present a hazard, but may present some potential for hazard if viewed directly for extended periods of time. ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13...
- Page 6 Press the STORE/ALARM SET button to save the value and to return to the normal mode. If the humidity measurement is lower than the low alarm setting or higher than the high alarm setting, the meter will beep once every second. ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13...
-
Page 7: Memory Mode
The meter will enter a sleep mode after 30 minutes of inactivity. The meter will emit a warning beep 15 seconds before shutting down. To disable the APO feature, press the MODE button when turning the meter ON. The “APO” icon will not appear, indicating it is disabled. ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13... -
Page 8: Specifications
Auto Power Off (APO) After 30 minutes (nominal) inactivity. The APO function can be disabled by the user. APO Quiescent Current 50µA maximum Dimensions 165x70x38mm (6.5x2.8x1.5’) Weight 210g (7.4oz) Copyright © 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form ISO‐9001 Certified www.extech.com ShopExtech 1.877.766.5412 Shop for Extech products at: .com MO295-EU-EN-1.5 4/13...
Need help?
Do you have a question about the MO295 and is the answer not in the manual?
Questions and answers