Sony CDX-C910 Operating Instructions Manual page 7

Playing the stored program
You can select:
• PGM 1 to play Program 1.
• PGM 2 to play Program 2.
• PGM 1+2 to play Programs 1 and 2.
1
Press (SHIFT).
2
Press (3) (P.MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired program appears.
Program Play starts.
Program 1 playback
CD
PGM 1
EQ SUR
µ
Program 2 playback
CD
EQ SUR PGM 2
µ
Programs 1 and 2 playback
CD
PGM 1+2
EQ SUR
µ
Normal playback
CD
PGM off
EQ SUR
4
Press (SHIFT).
To go back to the normal playback mode,
select "PGM off" in step 3 above.
Note
"NO Data" appears in the display if no track is stored in
the program.
Actual total number:
Erasing the entire program
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
2
Press (1) (N) repeatedly until "DEL"
appears.
To delete Program 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
PGM1
The entire program is erased.
4
When you finish erasing programs, press
(3) (P.MODE) for two seconds.
PGM 2
Adding tracks to the program
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
+
PGM1 2
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem full*"
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
Sony CDX-C910 (E) 3-856-715-21 (2)
DEL PGM edit
--PGM1--
EQ SUR
P1 PGM edit
NO Data
EQ SUR
CD PGM edit
EQ SUR 2 P1.‚2
TRACK
Track slot number
EN
7