Sony CDX-C910 Operating Instructions Manual page 15

Notes
• "*Wait*" appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• "*Mem full*" appears in the display when you try to
enter more than 12 tracks into a program at one time.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1
Press (SHIFT).
2
Press (3) (P.MODE) repeatedly until
"PGM" appears.
3
Press (4) (n) repeatedly until the
desired program appears.
Program Play starts.
z PGM 1 z PGM 2
PGM off Z
4
Press (SHIFT).
To go back to the normal playback mode,
select "PGM off" in step 3 above.
Notes
• If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
• "NO Data" appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the program memory, or when the program
information has not been loaded yet, "Not Ready"
appears.
Erasing the entire program
1
Press (SHIFT), then press (3) (P. MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit" above.
2
Press (1) (N) repeatedly until "DEL"
appears.
DEL PGM edit
--PGM1--
EQ SUR
Actual total number:
To erase Program 2, press (4) (n)
repeatedly until "PGM 2" appears.
3
Press (5) (ENTER) for two seconds.
EQ SUR
The entire program is erased.
4
When you finish erasing programs, press
(3) (P.MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to the program
1
Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display "PGM edit" above.
z PGM 1+2
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
EQ SUR
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, "*Mem full*"
appears in the display, and you cannot insert more
tracks.
5
When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
6
Press (SHIFT).
Sony CDX-C910 (E) 3-856-715-21 (2)
P1 PGM edit
NO data
Track slot number
CD2 PGM edit
2 4 P1.‚3
DISC TRACK
EN
15