Replacing a memory module
1. Remove the left-side cover. See "Removing the covers" on page 84.
2. Locate the memory connectors. See "Identifying parts on the system board" on
3. Open the retaining clips and remove the failing memory module.
4. Make sure the notch 1 on the new memory module is aligned correctly with
5. Go to "Completing the FRU replacement" on page 112.
90
Lenovo 3000 J Series
page 87.
the connector key 2 on the socket. Insert the memory module straight down
into the connector until it snaps into position and the retaining clips are closed.