Connecting An Rs-232 Interface - Motorola Symbol LS1203 Product Reference Manual

6 - 2 Symbol LS1203 Product Reference Guide

Connecting an RS-232 Interface

This connection is made directly from the scanner to the host computer.
Serial Port
Connector
to Host
RS-232 Direct Connection
Figure 6-1
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner remain
the same.
Attach the modular connector of the RS-232 interface cable to the cable interface port on the scanner (see
1.
Installing the Interface Cable on page
Connect the other end of the RS-232 interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
3.
into an appropriate outlet.
Select the RS-232 host type by scanning the appropriate bar code from
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
Power
Supply Cable
1-2).
Interface Cable
RS-232 Host Types on page
Figure 6-1 are examples
6-6.